Project 2 In-class activity

Instructions

• Download this apk (https://drive.google.com/file/d/1f4vkVxup8m0n5n1GWbfxLuhDwAtPrKoc/view?usp=sharing) 

• Sideload the .apk file onto your Quest

Rules of the game

• There is a crayon in the middle of the room you can pick up to draw

• Whoever holds the crayon is the drawer, everyone else guesses what they are drawing

• The crayon holder should see a prompt appear on the screen and create a drawing according to that prompt

• The crayon holder has to release the crayon for others to draw

Features

• You can press your left and right grasps to acquire the crayon

• Once you have the crayon, you can draw by pressing the right trigger (drawing only currently works for right hand)

• Once you have the crayon, you can see the prompt appear on the screen

• You should see others drawings

• You should see others holding the crayon

• You should be able to erase drawings by pressing the primary button

Help

If you haven't enabled developer's mode on your Quest, follow these instructions to do so:

1. Open the Oculus app and tap Settings (bottom-right)

2. Select your connected Quest from the device list and connect to it

3. Tap More Settings which appears below your Quest in the device list

4. Tap Developer Mode

5. Tap the switch to enable developer mode

6. Exit Settings on the app & reboot your Quest using the right-side power button

If you haven't downloaded Sidequest yet, you can install it here

To set up for sideloading using the Sidequest app:

1. Open the Sidequest app on your computer

2. Connect the Quest to your computer via USB cable. 

3. Put on the Quest headset – you should see a window open asking you to Allow USB debugging.

4. Check the box labelled Always allow from this computer and click OK

5. Click the icon showing an arrow inside a box at the top of the Sidequest window.

6. Choose the apk you downloaded from the window that opens

To launch the sideloaded .apk file on your Quest:

1. From your Quest headset, go to Library -> Unknown Sources

2. Click the app you want to launch from the list on the right

FILL OUT FORM